Table of Contents
Advertisement
3.
Secure the PPC-6120-EXPE onto the rear cover with screws (4 screws). Insert
the golden fingers of the riser card into the slot and use the screws to fix it (2
screws).
4.
Insert the desired card into the slot and use the screw to fix it.
5.
Replace the rear cover of PPC-6120-EXPE and use the screws (7 screws) to fix
it.
Note!
The size of PCI and PCIE card can not exceed 248mm long and 115mm
wide.
The total current load provided by the expansion slot is as follows:
12 V
5 V
3.3 V
-12 V
Total output power of 12 V, 5 V and 3.3 V can not exceed 25 W.
PPC-6120 User Manual
Figure 2.21 Assemble riser card
Figure 2.22 Complete assemble expansion kits
2 A
2 A
3 A
100 mA
20
Advertisement
Table of Contents
