Cables - Siemens SINAMICS G120 Hardware Installation Manual

Figure 4-2
Further information
Additional information about EMC-compliant installation is available in the Internet:
EMC installation guideline
en)
4.2.2

Cables

Cables with a high level of interference and cables with a low level of interference are
connected to the inverter:
● Cables with a high level of interference:
– Cable between the line filter and inverter
– Motor cable
– Cable at the inverter DC link connection
– Cable between the inverter and braking resistor
● Cables with a low level of interference:
– Cable between the line and line filter
– Signal and data cables
PM240P-2 Power Modules
Hardware Installation Manual, 11/2016, A5E37800827C AB
Grounding and high-frequency equipotential bonding measures in the control cabinet and
in the plant/system
(https://support.industry.siemens.com/cs/ww/de/view/60612658/
4.2 EMC-compliant installation of a machine the system
Installing/mounting
25