Mounting And Connecting The Brake Relay - Siemens SINAMICS G120 Hardware Installation Manual
Power modules pm240p-2, ip20
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Spare parts and accessories
8.3 Optional accessories
8.3.2.2
Mounting and connecting the Brake Relay
Mounting the Brake Relay
Mount the Brake Relay at the rear of the shield plate. Mount it before you mount the shield
plate.
Connecting the Brake Relay to the inverter
The connector for the Brake Relay is located at the front of the Power Module. Lay the cable
harness for the Brake Relay in the cable routing.
88
Mounting the shield plate and EMC connecting bracket (Page 33)
Hardware Installation Manual, 11/2016, A5E37800827C AB
PM240P-2 Power Modules
Advertisement
Table of Contents
