Siemens SINAMICS G120 Hardware Installation Manual page 13

Danger to life when safety functions are inactive
Safety functions that are inactive or that have not been adjusted accordingly can cause
operational faults on machines that could lead to serious injury or death.
● Observe the information in the appropriate product documentation before commissioning.
● Carry out a safety inspection for functions relevant to safety on the entire system, including
● Ensure that the safety functions used in your drives and automation tasks are adjusted
● Perform a function test.
● Only put your plant into live operation once you have guaranteed that the functions relevant
Note
Important safety notices for Safety Integrated functions
If you want to use Safety Integrated functions, you must observe the safety notices in the Safety
Integrated manuals.
PM240P-2 Power Modules
Hardware Installation Manual, 11/2016, A5E37800827C AB
WARNING
all safety-related components.
and activated through appropriate parameterizing.
to safety are running correctly.
Fundamental safety instructions
2.1 General safety instructions
13