Connecting-up
5.2 Connecting the line and motor cable at the inverter
Connect cables at the inverter so that they are EMC compliant
Attach the cable tie holders to the Power Module as shown to the left in the diagram before
you establish the connections.
Fix the line connecting cable using a cable tie as shown in
Fix the shield of the motor connecting cable using a hose clamp (
Connect the shield of the control cable with the shield plate of the Control Unit (
steel band. Also attach the control cable to the Power Module using a cable tie (
46
①
.
②
).
Hardware Installation Manual, 11/2016, A5E37800827C AB
③
) using a
④
).
PM240P-2 Power Modules