Polycom 1725-11530-310 Administrator's Manual page 362

Attribute
video.profile.H2631998.jitterBufferShrink
video.profile.H2631998.payloadType
video.profile.H2631998.CifMpi
video.profile.H2631998.QcifMpi
video.profile.H2631998.SqcifMpi
video.profile.H2631998.annexF
video.profile.H2631998.annexI
video.profile.H2631998.annexJ
video.profile.H2631998.annexT
Administrator's Guide Addendum for the Polycom VVX 1500 Business Media Phone
Permitted
Values Interpretation
33ms to The absolute minimum duration time (in
1000ms, milliseconds) of RTP packet Rx with no packet
default 70ms loss between jitter buffer size shrinks. Use
smaller values (33 ms) to minimize the delay
on known good networks. Use larger values
(1000ms) to minimize packet loss on networks
with large jitter (3000 ms).
96 (default) to RTP payload format type for H263-1998/90000
127 MIME type.
1 (default) to 32 This value is H263-1998/90000 format
parameter CIF used to signal
Polycom VVX 1500 receiving capability in SDP.
This value also controls the TX frame size. If
set to 1, CIF is used (provided the far end
supports CIF=1); otherwise QCIF is used.
1 (default) to 32 This value is H263-1998/90000 format
parameter QCIF used to signal
Polycom VVX 1500 receiving capability in the
SDP.
1 (default) to 32 This value is H263-1998/90000 format
parameter SQCIF used to signal
Polycom VVX 1500 receiving capability in the
SDP.
0, 1 This value is H263-1998/90000 format
default Null parameter ANNEXF used to signal
Polycom VVX 1500 receiving capability in the
SDP.
0, 1 This value is H263-1998/90000 format
default Null parameter ANNEXI used to signal
Polycom VVX 1500 receiving capability in the
SDP.
0, 1 This value is H263-1998/90000 format
default Null parameter ANNEXJ used to signal
Polycom VVX 1500 receiving capability in the
SDP.
0, 1 This value is H263-1998/90000 format
default Null parameter ANNEXT used to signal
Polycom VVX 1500 receiving capability in the
SDP.
1 - 15