Polycom 1725-11530-310 Administrator's Manual page 356

Application Configuration File Changes
Attribute
bg.VVX_1500.color.selection
bg.VVX_1500.color.bm.x.name
Attribute
video.enable
video.autoStartVideoTx
Administrator's Guide Addendum for the Polycom VVX 1500 Business Media Phone
Background <bg/>
This configuration attribute is defined as follows:
Permitted
Values Default
w,x 1,1
any string Null
Video <video/>
These configuration attributes are defined as follows:
Permitted
Values Default
0=Disable, Null
1=Enable
0, 1 Null
Interpretation
Specifiy which type of background (w) and index
for that type (x) is selected on reboot where w=1
to 3, x=1 to 6.
The type of backgrounds are built-in (w=1), solids
(w=2), and bitmaps (w=3).
w=2 is used when selecting any image as a
background.
w=3 is used when selecting any image from the
Digital Picture Frame as a background. This
image is stored under "Local File". Only one local
file at a time is supported.
Graphic files for display on the phone .
For example, if you set
bg.VVX_1500.color.bm.1.name to
Polycom.bmp, the user will be able to select
"Polycom.bmp" as a background on the phone.
Interpretation
Flag to determine whether or not video calls are
established. This applies to all calls, between two
Polycom VVX 1500s and between
Polycom VVX 1500 and any other video device.
If set to 1 (enabled) or Null, video is sent in
outgoing calls and received in incoming calls.
If set to 0, video is not sent in outgoing calls and
not received in incoming calls. All calls are audio
only.
Flag to determine whether or not video
transmission occurs when a call starts.
If set to 0, video transmission does not start.
If set to 1or Null, video transmission from the near
end starts when a call starts.
1 - 9