Set Per-Cup Quantity; Adjusting The Grinding Unit - Siemens TK76K573 Instruction Manual

de en
The appliance can also be reset
to the factory settings as follows:
1. Switch the appliance off fully at the
power switch O/I (1).
2. Press < and
1
time, hold them down, and switch the
appliance on again at the power switch
O/I (1).
The factory settings are reactivated.
Set per­cup quantity
The per-cup quantity can be adjusted
individually to suit your cups. It can be set
separately for each type of drink and each
cup size.
1. To call up the default settings, keep
(7) depressed for at least 3 sec-
i
onds.
2. Select
Per-cup quantities
3. Press start stop (8).
4. Select the type of drink with the rotary
knob (4).
5. Press .
>
6. Select the cup size with the rotary knob
(4).
7. Press .
>
8. Set the per-cup quantity with the rotary
knob (4).
returns you to cup size and drink
<
selection. To quit the default settings, press
(7). The settings are stored.
i
When the cup size is selected, the changed
per-cup quantity is shown graphically:
Coffee 1x
*
( (
–
+
Per-cup quantity reduced compared
with standard setting
Per-cup quantity increased compared
with standard setting
Standard
42
> (3) at the same
with
>
+
1x
–
+
Important:
5
The selected amount in ml is an
approximate value and can vary
significantly as a result of crema
forming, the grind setting or the
type of milk used, etc.

Adjusting the grinding unit

The rotary selector (16) on the top of the
appliance adjusts the degree of grinding
from coarse to fine as required.
16
Warning:
Adjust the grinding unit only while
it is running. Otherwise the appli-
ance may be damaged.
1. Deploy the appliance fully
(see "Deployment system").
2. In the drink selection menu, select
.
Espresso
3. Press start stop (8).
4. While the grinding unit is running, adjust
the rotary selector (16) from fine
coarse or back as required.
The new setting will not
become apparent until after the
second cup of coffee.
For dark roast coffee beans,
choose a finer grind, for lighter
beans a coarser grind.
2 6 3 4 3 7 8
to