Download Print this page

Cleaning The Milk System - Siemens TK76K573 Instruction Manual

Hide thumbs Also See for TK76K573:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28
en
de
Important: Drip tray for coffee
outlet (25) and coffee grounds
container (26) should be emp-
tied and cleaned daily to prevent
mould from developing.
If the appliance is cold when
switched on with
or if it is set to "energy saving
mode" after dispensing coffee,
it rinses automatically. In other
words the pipework inside the
appliance is cleaned by the ma-
chine itself.
Important: If the appliance has
not been used for a prolonged
period of time (e.g. after a vaca-
tion), clean the entire appliance
thoroughly, including the milk
system and brewing unit.

Cleaning the milk system

Risk of burns
The milk frother (10) gets very
hot. After use, allow to cool
down first before touching.
The message
Short rinse for milk
system – ▸ Start
appears
X if cleaning has not been performed after
use
X if the appliance has been switched to
"energy saving mode" with the on off
button and has not previously been
cleaned
X shortly before the appliance automati-
cally switches to "energy saving mode"
without first having been cleaned
If this message appears, start with Step 2
under "
Short rinse for milk system
Clean the milk system immediately after
use.
44
Short rinse for milk system:
1. In the menu for drink selection, select
Short rinse for milk system
on off (2),
2. Press
3. Place a cup under the milk frother (10)
and the end of the milk tube in the cup.
4. Press
ance now fills the cup automatically with
water and draws it in again through the
milk tube for rinsing. The rinse proce-
dure takes about 1 minute.
5. Empty the cup and clean the milk tube.
11
Cleaning the milk system:
1. Dismantle the milk frother for cleaning.
To do this, lower the cover (11), grasp the
milk frother (10) and pull it out forward.
2. Clean the holder of the milk frother (22)
with a soft cloth.
3. Dismantle the milk frother (10a and 10b).
4. Clean the components either by hand
or in the dish washer (put them in the
cutlery basket).
5. Reassemble the individual parts and
replace them in the appliance. Press
back in fully.
".
All the parts can also be put in
the dishwasher.
start stop (8).
start stop (8). The appli-
10
10a
10b
.
22

Hide quick links:

Advertisement

loading