Preparing Milk Froth And Warm Milk - Siemens TK76K573 Instruction Manual

1
My coffee
The My coffee
the exact mix of coffee and frothed milk that
suits your own individual taste.
1. Connect the milk tube to the milk frother
(see "Preparation using milk").
2. Place container with milk on the grate.
Introduce the milk tube into the contain-
er. The notched end of the tube should
be fully immersed in the milk.
3. Place a cup under the coffee outlet (9).
4. Select
My coffee
(4).
My coffee
5. Press
strength selection. Set the required
strength with the rotary knob
My coffee
6. Press
quantity selection. Set the required per-
cup quantity with the rotary knob
1x
*
(
–
+
7. Press
the coffee/milk ratio. Set the required
mix by turning the rotary knob
20% steps.
+
1x
(
–
+
5
setting allows you to define
with the rotary knob
1x
*
)
–
+
(3) to switch to the coffee
>
(4).
1x
*
(
–
+
(3) to go on to the per-cup
>
+
(
–
+
(3) to switch to selection of
>
Espresso Milk
(
2 6 3 4 3 7 8
8. Press
The drink is prepared in the required coffee/
milk ratio.
The changes you have made
are saved automatically. It is
not necessary to confirm them
additionally.
Preparing milk froth and warm
milk
Risk of burns
The milk frother (10) gets very
hot. After use, allow to cool
down first before touching.
For optimal milk froth quality, use
cold milk with a fat content of at
least 1.5 % if possible.
1. Take the milk tube and connect it to
the milk frother (see "Preparation using
) milk").
2. Place a cup or glass under the outlet of
the milk frother (10).
3. Select the required
Warm milk
knob
)
Milk froth
4. Press
(4). Milk froth or warm milk runs out of the milk
frother outlet (takes about 40 or 60 seconds
respectively).
)
Press start stop (8) again to cut the
process short.
The appliance may make a
(4) in whistling noise when warm milk
is being prepared. This is caused
by the milk frother (10) for techni-
cal reasons.
start stop (8).
Milk froth
setting by turning the rotary
(4):
start stop (8).
de en
or
39