Dispensing Hot Water; Information And Settings; Displaying Information; Displaying Settings - Siemens TK76K573 Instruction Manual
Hide thumbs
Also See for TK76K573:
- Instruction manual (182 pages) ,
- Manual (162 pages) ,
- Instruction manual (176 pages)
Advertisement
Available languages
Available languages
de
en
Dried milk residue is difficult to
remove, so clean the milk frother
immediately after use.
(see “Cleaning the milk system”)
Dispensing hot water
Risk of burns
The milk frother (10), from
which the hot water flows,
gets very hot. After use, allow to cool
down first before touching.
The appliance can also be used to
dispense hot water, e.g. for tea.
1. Place a cup or glass under the coffee
outlet.
2. Select
with the
Hot water
rotary knob
(4):
Hot water
)
–
+
3. Press
(3) to switch to the tem-
>
perature selection. Set the required
temperature with the rotary knob
(4):
Hot water
)
–
+
4. Press
start stop (8).
Hot water runs out of the milk frother outlet
for about 40 seconds.
Press
start stop (8) again to cut the
process short.
Warm up cups before use,
especially small, thick espresso
cups, with the hot water.
Information and settings
Use
i
(7) to display information (press
briefly) and adjust settings (hold down for at
least three seconds).
Displaying information
In the Info menu (press
(7) briefly) you
i
can call up the following information:
X when it is necessary to descale the
appliance
X when it is necessary to clean the
appliance
X when it is necessary to change the filter
X how much coffee has been dispensed
since the appliance was first put into
operation
X how many milk drinks have been
dispensed
X how much hot water has been prepared
Informations / Service
....................................................................................
Descale after
100 cups
Displaying settings
Hold down
i
(7) for at least 3 seconds;
the different setting options are then
displayed:
Default settings
Language:
Per-cup quantities
English
Use
and
(3) to switch between
<
>
the different setting options. The currently
active setting is always highlighted in white.
You can change the setting that is currently
displayed by turning the rotary knob
(4).
To exit the menu, press
(7) again.
i
Page 40
Hide quick links:
Advertisement
Chapters
