de
en
The appliance may make a
whistling noise when warm milk is
being prepared. This is caused by
the milk frother (10) for technical
reasons.
Dried milk residue is difi cult to
remove, so clean the milk frother
immediately after use.
(see “Cleaning the milk system”)
Dispensing hot water
Risk of burns!
The milk frother (10), from
which the hot water l ows,
gets very hot. After use, allow to cool
down i rst before touching.
The appliance can also be used to dis
pense hot water, e.g. for tea.
1. Place a cup or glass under the coffee
outlet.
2. Select
with the
Hot water
rotary knob
(4):
Hot water
3. Press
(3) to switch to the tem
>
perature selection. Set the required
temperature with the rotary knob
(4):
Hot water
start stop (8).
4. Press
Hot water runs out of the milk frother outlet
for about 40 seconds.
start stop (8) again to cut the
Press
process short.
Warm up cups before use,
especially small, thick espresso
cups, with the hot water.
Page 43