Replacing The Oven Light - Siemens HB 760.60 B Instruction Manual

Replacing the oven
light
Method
46
4. Pull out the bulb do not turn it and insert the
new bulb. Figure B. Take care to position the pins
correctly. Press the bulb in firmly.
5. Fit the glass cover back on. To do this, insert it on
one side and press firmly on the other side. The
glass cover will now click into place.
6. Remove the tea towel and switch the fuse back
on.
If the oven light fails, it must be replaced.
Heat resistant 25 watt halogen bulbs are available
from your local specialist. Hold the halogen bulb with
a dry cloth. This will increase the life of the bulb.
Only use these bulbs.
1. Switch off the fuse in the fuse box.
2. Place a tea towel in the cold oven to prevent
damage.
3. Remove the glass cover. To do this, open the
glass cover from underneath by hand. Fig. A.
If the glass cover is difficult to remove, use a spoon
to help you.
4. Remove the bulb do not turn it and fit the new
bulb. Fig B. Take care to position the pins
correctly. Push the new bulb in firmly.