Seal
Accessories
42
3. Insert the middle glass panel (Fig. E).
4. Replace the seal again at the bottom of the panel.
(Fig. E)
5. Put the small clips on the lower glass panel (Fig. F).
6. Fit the large clips and screw them into place
(Fig. F).
7. Slide in the top panel at an angle towards the rear.
8. Replace the cover and screw it back on.
9. Refit the oven door.
The oven must not be used again until the panels
have been correctly installed.
Clean the seal on the oven with washing up liquid.
Never use caustic or abrasive detergents.
Immediately after use, soak the accessories in
washing up liquid. Food residues can then be easily
removed with a brush or sponge.
The universal pan can be cleaned at the same time as
the automatic self cleaning.