Tadiran Telecom Emerald ICE Quick Start Manual page 16

System Registration and Deregistration
Deregistration Both Hansets Individually Using the Base Unit
Handset 1
1. Unplug Line 1 from the rear of the Base Unit.
2. Set Base Unit DIP switches as follows:
DIP SWITCH-1 to OFF (up)
DIP SWITCH-2 to OFF (up)
DIP SWITCH-3 to ON (down)
3. Plug Line 1 into the marked receptacle on the rear of the Base
Unit. The LED on the base will flash [Fast].
After 30 seconds, handset 1 will be deregistered.
4. Turn all of the DIP SWITCH on the base unit to OFF (up).
Note:
The LED on the base will flash [Normally] when the unit comes
back to normal mode.
Handset 2
1. Unplug Line 1 from the rear of the Base Unit.
2. Set Base Unit DIP switches as follows:
DIP SWITCH-1 to ON (down)
DIP SWITCH-2 to OFF (up)
DIP SWITCH-3 to OFF (up)
3. Plug Line 1 into the marked receptacle on the rear of the Base
Unit. The LED on the base will flash [Fast].
After 30 seconds, handset 2 will be deregistered.
4. Turn all of the DIP SWITCH on the base unit to OFF (up).
Note:
The LED on the base will flash [Normally] when the unit comes
back to normal mode.
Page 2-2