Drive Carrier Leds; Table 4-3 Drive Carrier Leds - Silicon Graphics UV 30 User Manual

Drive Carrier LEDs

007-6419-002
Each hard drive carrier has two LEDs.
Table 4-3
Drive Carrier LEDs
LED Color
Activity LED Blue
Blue
Status LED Red
Red
Red
Red
Red
Green
Amber
Refer to "Replacing Disk Drives" on page 34
Table 4-3 describes the functions of the two LEDs.
Blinking Pattern
Solid on
Blinking
Solid on
Blinking at 1 Hz
Blinking with two blinks and
one stop at 1 Hz
On for five seconds, then off
Blinking at 4 Hz
Solid on
Blinking at 1 Hz
for instructions on replacing failed drives.
Drive Carrier LEDs
Behavior for Device
SAS/NVMe drive installed
I/O activity
Failure of drive with RSTe support
Rebuild drive with RSTe support
Hot spare for drive with RSTe support
Power on for drive with RSTe support
Identify drive with RSTe support
Safe to remove NVMe device
Attention state. Do not remove NVMe
device.
27