How To Use The Control Panel; Examples Of Scrolling Information On The Display - IVT Greenline D14 Manual To Installation, Commissioning And Maintenance

How to use the control panel

With the help of three buttons and a dial you can navigate to the various displays for settings and
readings. The last line at the bottom of the display contains information about the functions of the
buttons in the current display. If you choose "Heat" or "Info" the display you have chosen to stay in
will always remain.
With the dial you
navigate up and
down between
the displays or
change the
settings.
Press "Heat" once more
and you come to the
shortcut for heat settings.
You can choose to stay in
which display you want.
Examples of scrolling information
STANDBY
No rad heat required
No hot water
required
HOTWATER MODE
Heat pump only
Stop temp
Present temp
HEAT RAD MODE
Compr. + Add. heat
Stop temp
Present temp
HEAT RAD REQUIRED
Heat pump starts
in 320 seconds
Press "Info" once and you receive continuous information about what
the heat pump is doing and at which temperature it stops at. You can
choose to remain in this display and always receive this information.
Press the middle button again to return to the first display.
47.5°
42°
45°
44°
Rego600
020301 12:00:00
Heat Info
Here are some of the displays you see if you choose
scrolling information with the "Info" button:
Heat pump is not operating.
The heat pump is producing hot water and you see the
current temperature and the temperature it stops at.
The heat pump and additional heat is in operation.
A need for heat has arisen and the heat pump is waiting for
the reset time to count down to zero.
13
K1
Fr
Menu
Press "Menu" once and
you come to the main
menu for settings or
temperature readings.