Control Panel; Control Panel Buttons And Displays - IVT GreenlineC Manual To Installation, Commissioning And Maintenance

Control panel

Control panel buttons and displays

The control panel is the heart of your heat pump installation. From the control panel, instructions are
sent to the Rego600 control unit, which ensures that the house is uniformly heated. All settings are
carried out here and the display shows the settings that have been set.
This lamp is lit when
hot water is being
heated. It blinks during
hot water peaks and
This lamp blinks when
additional hot water.
a fault has occurred.
This knob is used
to navigate the
menu and to
change settings.
Press once for a short
cut to the heat
settings.
This lamp is lit when
The heat pump is in
the heat pump needs
operation when this
additional heat.
lamp is lit.
Rego600
020301 12.00.00
Heat Info
Press once for Press once to come to
continuous informa- the complete menu for
tion about operation settings and tempera-
conditions for the heat tures.
pump and additional
heat.
12
This switch is used to
turn the heat pump on
and off. The heat pump
is in operation when
the lamp is lit. The heat
pump is off when it
blinks.
This shows you
which user level
you are in.
K1
This display
Fr
Menu
shows information
such as text and
temperatures.