IVT Greenline D14 Manual To Installation, Commissioning And Maintenance page 63

according to Machinery Directive 89/392/EEC, Annex IIA, EC Low-voltage directive
73/23/EEC, EMC Directive 89/336/EEC & 92/31/EEC, Pressure Equipment Directive PED 97/23
EEC, including addendum of the CE marking directive 93/68/EEC
Type of product
Commercial name:
Type:
Name of manufacturer:
Address:
Telephone:
Fax:
The above heat pumps contain pressure carrying devices and operating fluid as set out below:
- Fluid group
- Category
- Module selection with CE-marking
The manufacturer declares that the product conforms with aforementioned directives and are designed
according to the following standards:
1. EN 60 335-2-40
2. EN 50 081-1
3. EN 50 082-1
4. The Swedish Refrigeration Code
5. SS 065251
The product is manufactured under a production control system, which guarantees conformity between
the manufactured products and technical data.
Installation, connection, maintenance and usage should take place in accordance with the product's
instructions and design, which are described in the manufacturer's technical documentation as well as
according to practice.
In accordance with the EU declaration of conformity, the product must not be modified without the
manufacturer's permission. If this occurs, this documented EU declaration ceases to apply and the
product's owner is considered to be the manufacturer and must verify and draw up an addendum to the
EU declaration and file technical data for the inspection authority.
The product is CE-marked.
2003-10-14
Johnny Wärnelöv
MD
EU DECLARATION OF CONFORMITY
Electric heat pump
IVT
Greenline D20-D40, E20-E25, F20-F65, G13-G43,
Optima 1000-1300
IVT Industrier AB
Box 1012
SE-573 28 Tranås
Sweden
int. +46 140 38 41 00
int. +46 140 178 90
2
II
A1
Electrical safety
EMC-emissions
EMC-immunity
PED
Competence qualification of brazing operators