Control Panel; Control Panel Buttons And Displays - IVT Greenline D14 Manual To Installation, Commissioning And Maintenance

Control panel

Control panel buttons and displays

The control panel is the heart of your heat pump installation. From the control panel, instructions are
sent to the Rego 600 control unit, which ensures that the house is uniformly heated. All settings are
carried out here and the display shows the settings that have been set.
This lamp is lit when
hot water is being
heated. It blinks
This lamp blinks during hot water
when a fault has peaks and additional
occurred. hot water.
This dial is used to
navigate the menu
and to change
settings.
Press once for a
short cut to the
heating settings.
The heat pump is in
This lamp is lit when
operation when this
the heat pump needs
lamp is lit.
additional heat.
Rego600
020301 12.00.00
Heat Info
Press once for Press once to come
continuous informa- to the complete
tion about operation menu for settings
conditions for the and temperatures.
heat pump and
additional heat.
12
This switch is used
to turn the heat pump
on and off. The heat
pump is in operation
when the lamp is lit
The heat pump is off
when it blinks.
This shows you
which user level
you are in.
K1
Fr
This display
Menu
shows informa-
tion such as text
and tempera-
tures.