Table of Contents
Advertisement
SOFTWARE SETUP
File support
Using setpoint files
3–22
8.
Click Print to print a copy of the customized front panel label.
Opening any EnerVista 3 Series Setup file will automatically launch the application or
provide focus to the already opened application. If the file is a settings file (has a 'SR3'
extension) which had been removed from the Settings List tree menu, it will be added back
to the Settings List tree.
New files will be automatically added to the tree.
The EnerVista 3 Series Setup software interface supports three ways of handling changes
to relay settings:
•
In off-line mode (relay disconnected) to create or edit relay settings files for later
download to communicating relays.
•
Directly modifying relay settings while connected to a communicating relay, then
saving the settings when complete.
•
Creating/editing settings files while connected to a communicating relay, then saving
them to the relay when complete.
Settings files are organized on the basis of file names assigned by the user. A settings file
contains data pertaining to the following types of relay settings:
•
Device Definition
•
Relay Setup
•
System Setup
•
Protection
•
Control
•
Inputs/Outputs
Factory default values are supplied and can be restored after any changes.
The EnerVista 3 Series Setup displays relay setpoints with the same hierarchy as the front
panel display.
350 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES
Advertisement
Table of Contents
