Diffuser; Single Led Tubes - Martin LC 2140 User Manual

7. See Figure 5. Continue hanging panels, attaching them with conical couplers (A) secured with threaded
spigots (B) as illustrated. As soon as a panel is added to an array, secure it with two safety attachments.
Hang a maximum of seven panels in a vertical curtain. An unlimited number of correctly suspended
panels may be attached horizontally.
B

Diffuser

B
A
Figure 6: Diffuser front mounting holes
Physical installation
B
Figure 5: Conical coupler system
280 360 280
LC 1140: 900 LC 1140: 900
LC 2140: 1900 LC 2140: 1900
15
480 440
A
B
A diffuser may be fastened to the panel,
respecting the diffuser manufacturer's
safety precautions. Installing a diffuser
gives a softer rendition of the video
image, eliminating the 'hot-spot' effect.
Threaded holes for fastening a diffuser
front are provided next to the holes for
the conical coupler system. See Figure 6
for dimensions.

Single LED tubes

If you install panels angled away from
each other, you will be left with a gap in
the LED tubes at the apex of the angle.
To fill this gap and give a solid wall of
LEDs, it is possible to install a single
LED tube between two panels. This tube
must be connected to the Aux. Out
connector on the connections panel.
If you are interested in this solution,
contact your Martin supplier for details.
11