Boot Configuration - Advantech PCA-6763 User Manual

3.2.3.3.4Restore on AC Power Loss
This item allows you to select system restore states if AC power loss.
3.2.3.3.5Wake On Ring
Enable or disable wake on ring.
3.2.3.3.6Port 80h Redirection
Control where the port 80h cycles are sent.
3.2.4

Boot Configuration


Setup Prompt Timeout
This item allows you to change number of seconds to wait for setup activation
key.

Bootup NumLock State
Select the Power-on state for Numlock.

Quiet Boot
If this option is set to Disabled, the BIOS displays normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.

GateA20 Active
This item allows you to select Upon request or Always.

Option ROM Messages
Set display mode for option ROM.

Interrupt 19 Capture
This item allows option ROMs to trap interrupt 19.

Boot Option
Sets the system boot order.
PCA-6763 User Manual 48