Function Control During Group Control Setting (Air Conditioner); External Devices Of Indoor Unit Setting (Air Conditioner) - LG PREMTB100 Owners & Installation Manual

INSTALLER SETTING
120

Function control during group Control setting (air conditioner)

This function enables the control of the common functions or some functions based on the mas-
ter indoor unit during the group control.
• Change setting values using [<,>(left/right)] button.
Value
Not use
Use
NOTE
!
Common functions and some indoor unit master standard setting shall be set only during
the group control with the same type indoor units.
During the group control with different indoor unit types, set it as '000' to use the existing
group control method.
Description
Common function,
Use expanded function which
is based on master indoor unit

External devices of indoor unit setting (air conditioner)

At the Code field, select when air cleaner/heater/humidifier/elevation grill/ventilation KIT/refriger-
ant leakage detection sensor are newly installed to the indoor unit or when an installed KIT is re-
moved.
• You can set the following setting values using [<,>(left/right)] button.
Function
Plasma purification
Heater
Humidifier
Elevation grill
Ventilation Kit
Refrigerant leakage detection sensor
INSTALLER SETTING
121
Value
Not install / Install