Power Cool Operation; Operation Setting - Ventilator; Operation Mode - LG PREMTB100 Owners & Installation Manual

OPERATION SETTING
24

Power Cool Operation

Power cooling quickly lowers the indoor temperature.
Desired temperature: 18°C
Fan speed : Power fan speed
fan direction: Current fan direction
- During the power cooling, if fan speed or desired temperature is changed, the power cooling is
cleared, and it operates in the cooling operation mode.
- During the power cooling, if you press [On/Off] button, the power cooling operation stops, and
when you press [On/Off] button again, it operates in the cooling operation mode.

OPERATION SETTING - VENTILATOR

Operation mode

Ventilation (general and direct cooling type ventilation) operation mode supports the following op-
eration modes.
※Some products may not support some operation modes.
Mode Classification
It measures the ventilation system's indoor tempera-
Auto ture and the outdoor temperature for the automatic op-
eration in the optimal ventilation mode state.
It is the mode of ventilation with both supply/discharge
Ventilation operation
through the heat exchanger. It is adequate to use in
Heat Exchange mode – commonly
summer/winter where the indoor/outdoor temperature
supported by ventila-
difference is big.
tion products
It is the ventilation where the exhausted air is ventilated
without going through the exchanger. It is adequate to
Bypass
use in spring/fall or when the indoor contamination is
severe.
Cool Cools down the room to desired temperature.
Heat It provides warm wind to the room.
Air conditioner opera-
tion mode – supports
The product automatically provides the appropriate fan
direct cooling type
Auto
speed based on the temperature of the room.
ventilation
Stop It stops the product's air conditioner operation.
In the main screen, press [<,>(left/right)] button to select the operation mode category, and press
[∧,∨(up/down)] button to set the operation mode.
※The direct cooling type ventilation's air conditioner operation mode is composed separately
from the ventilation operation mode.
OPERATION SETTING - VENTILATOR
25
Description