Open Source License; Installation; Installation Of Remote Controller - LG PREMTB100 Owners & Installation Manual

SERVICE SETTING
98

Open source license

View the remote controller's open source license.
• In the service setting list, select the open source license category, and press [OK] button to
move to the detail screen.
OK

INSTALLATION

Installation of Remote Controller

• After fixing the remote controller installation plate on the desired location, fix it firmly with the
provided screws.
- If the installation is bent, installation defect may occur, so install it without bending.
- If there is a reclamation box, install the remote controller installation plate according to the
reclamation box as in the following figure.
- Do not leave a gap with the wall or product shaking after the installation.
<4 socket reclamation box installation>
• The wired remote controller cable can be installed in 3 directions. Install to the suitable direc-
tion according to the installation environment.
- Installation direction: wall reclamation, top side, right side
- When you install the remote controller cable at the top side and right side, remove the remote
controller cable guide hole before the installation.
※ Use a long nose to remove the guide hole.
• After removing the hole, trim the cut surface neatly.
Top side guide groove
Right side guide
groove
Wall reclamation
• After fixing the remote controller top side on the installation plate attached to the wall as in the
following figure, press the bottom side to combine with the installation plate.
- Do not leave a gap in the top, bottom, left, and right side of the remote controller and the in-
stallation plate after combining them.
- Before combining with the installation plate, arrange the cables to avoid interference with the
circuit parts.
<Order of Combining>
Wall
INSTALLATION
99
<2 socket reclamation box installation>
Top side guide groove
Right side guide
groove
Wall