Emergency Heater Setting (Air Conditioner); Function Control During Group Control Setting (Air Conditioner) - LG PREMTB100 Owners & Installation Manual

INSTALLER SETTING
130

Emergency heater setting (air conditioner)

Enable the emergency heater control function and the usage environment.
• In the installer setting list, select the emergency heater setting category, and press [OK] button
to move to the detail screen.
- In case of an error, it sets whether the emergency heater can be used / outdoor temperature
standard heater operation usage setting and temperature step value setting / and during the
emergency heater operation, whether to use the indoor unit fan operation.
Outdoor temperature standard heater
Value
operation
Not use -
Emergency heater Step 0 ~ 3
Use
Extended emer-
Step 0 ~ 15
gency heater
NOTE
!
This function setting must be carried out by a certified-technician.
OK
Fan operation in emergency
control
-
On/Off

Function control during group Control setting (air conditioner)

This function enables the control of the common functions or some functions based on the mas-
ter indoor unit during the group control.
• Change setting values using [<,>(left/right)] button.
Value
Not use
Use
NOTE
!
Common functions and some indoor unit master standard setting shall be set only during
the group control with the same type indoor units.
During the group control with different indoor unit types, set it as '000' to use the existing
group control method.
INSTALLER SETTING
Description
Common function,
Use expanded function which
is based on master indoor unit
131