Temperature Sensor(2Th) Setting(Air Conditioner); Ceiling Height Setting (Air Conditioner) - LG PREMTB100 Owners & Installation Manual

INSTALLER SETTING
112

Temperature sensor(2TH) setting(air conditioner)

It is the function to select the temperature sensor to decide the indoor temperature.
• You can set the following setting values using [<,>(left/right)] button.
Temperature sensor location
Operate the system with wired remote controller's temperature
Remote controller
sensor
Indoor Unit Operate the system with indoor unit's temperature sensor
Compare the temperatures of the indoor unit and the wired re-
Cool mote controller and operate with the higher temperature
(There are system operated with lower temperature)
2TH
Compare the temperatures of the indoor unit and the wired re-
Heat
mote controller and operate with the lower temperature
• 2TH function's operation characteristics may be different for each product.
Description

Ceiling height setting (air conditioner)

It is the function to control the fan speed stage according to the ceiling height in the ceiling type
product.
• You can set the following setting values using [<,>(left/right)] button.
Ceiling height
Low Fan speed operates one step slower than the default value.
Standard Operates at the default fan speed
High Fan speed operates one step faster than the default value.
Very high Fan speed operates two steps faster than the default value.
NOTE
!
When group control is enabled some functions are limited depending on product type.
INSTALLER SETTING
113
Description