Operation Setting; On / Off; Operation Mode; Cooling Operation - LG PREMTB100 Owners & Installation Manual

OPERATION SETTING

18
OPERATION SETTING

On / Off

Air conditioner and ventilator will be turned on or off.
Press the remote controller's (On/Off) button.
- If the product is in operation, On/Off button will be illuminated.
If the product is in off, On/Off button backlight will be off.

Operation mode

You can easily control the desired operation mode.
In the main screen, press [<,>(left/right)] button to select the operation mode or home leave or
hold category, and press [∧,∨(up/down)] button to set the operation mode.
※Some products may not support some operation modes.
Mode
Cool Cool the room to the desired temperature.
Dry It removes the moisture with cooling.
Heat Heats the room to the desired room temperature.
The product automatically provides the appropriate fan speed based on
AI / Auto
the temperature of the room.
Fan It blows the indoor air as it is, not a cold wind.
Power Cool It provides strong cooling in short time.
Description

Cooling Operation

Cooling operation's minimum setting temperature is 18°C.
For some types of the indoor units, the desired temperature can be controlled in the units of 1°C
or 0.5°C.
- Set the desired temperature lower than the indoor temperature.
- Indoor temperature is displayed on the default screen of the remote controller.
- If the setpoint is set higher than the room temperature, then the unit will remain in the cool
mode but will not begin to cool unit the room temperature exceeds the setpoint.
- If you unit is operating in cooling mode and you press the [On/Off] button the cooling operation
will shut off.
What is 3 minute delay function?
After the cooling stops, when the product is started right away, the reason that the cold
wind does not come out is that it is the function to protect the compressor.
The compressor starts after 3 minutes and the cold wind comes out.
NOTE
!
The compressor starts after 3 minutes and the cold wind comes out.
In the cooling operation, you can select the desired temperature in the range of 18°C ~ 30°C.
The favorable temperature difference between the indoor temperature and the outdoor tem-
perature is 5°C.
OPERATION SETTING
19