Speaker Assembly - HP EliteBook x360 1020 G2 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly contains four speakers, with foam/rubber tape
Before removing the speaker assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the speaker assembly:
1. Disconnect the front speakers from the system board (1).
2. Remove the four screws securing the front speakers (2).
3. Remove the plastic tape holding the front speaker cable (3).
4. Remove the front speakers (4).
5. Remove the rear speaker (5).
Bottom cover on page
Battery on page 27).
26).
Component replacement procedures
Spare part number
937416-001
29