Battery - HP EliteBook x360 1020 G2 Maintenance And Service Manual

2. Pry up on the top (near the display hinge) of the bottom cover (1) to disengage it from the computer and
then remove the bottom cover (2).
Reverse the removal procedures to install the bottom cover.

Battery

Description
4-cell, 49-Whr, 6.4-Ah, Li ion battery
Before disassembling the computer, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
Remove the battery:
1. Disconnect the battery cable from the system board (1).
2. Remove the six Phillips screws (2) that secure the battery to the computer.
Bottom cover on page 26).
Spare part number
915191-855
Component replacement procedures 27