Reordering - Danfoss PVG 120 Service Manual

Service Manual
Order specification
PVG 120 Proportional Valve Group
Please state:
•
Code numbers of all modules required
•
Required setting (p) for pump side module
•
Required setting of LS
A/B

Reordering

The space at the top right-hand corner of the form is for Danfoss to fill in. The code number for the whole
of the specified valve group (PVG No.) is entered here. In the event of a repeat order all you have to do is
enter the number Danfoss has given on the initial confirmation of order.
If PVG 120 is to be used with phosphate-esters this must be stated on the order form (See
Fluids for more information).
520L0247 • Rev JA • May 2014
pressure relief valves, if accessory module PVBR is ordered.
Non-flammable
49