Reordering - Danfoss PVG 120 Technical Information

Technical Information
PVG 120 Proportional Valve Group
Order specification
46 | © Danfoss | March 2017
•
Code numbers of all modules required
•
Required setting (p) for pump side module
•
Required setting of LS
A/B

Reordering

The space at the top right-hand corner of the form is for Danfoss to fill in. The code number for the whole
of the specified valve group (PVG No.) is entered here. In the event of a repeat order all you have to do is
enter the number Danfoss has given on the initial confirmation of order.
If PVG 120 is to be used with phosphate-esters this must be stated on the order form.
pressure relief valves, if accessory module PVBR is ordered.
520L0356 | BC00000040en_US1002