Switching The Wireless Headphone System On - Sennheiser Flex 5000 Manual

Flex_5000_570735_0117_PRT.book Seite 15 Montag, 10. Oktober 2016 3:58 15

Switching the wireless headphone system on

WARNING
Danger of hearing damage due to high volumes!
This receiver allows you to set higher volumes than
conventional devices. Constant high-volume use can
cause hearing damage.
Before putting the receiver and the connected head-
phones on, set the volume on the receiver to a low
level.
Do not expose yourself to high volume levels for
extended periods of time.
Use a hearing profile (see page 20) that improves
especially speech intelligibility without the need for
a high volume.
1 Switch your audio source on.
If the transmitter is connected to the head-
phone socket (see page 8) of your TV/audio
source, adjust the volume of the headphone
socket on your TV/audio source to at least a
medium level.
2 Take the receiver out of the transmitter's charging com-
partment and press the volume button
The receiver switches on. The
green. The transmitter automatically switches on and the
Transmitter status
transmission starts.
The remaining operating time of the receiver is displayed
on the transmitter (see page 12).
1 2
ON
Receiver status
LED lights up white or blue. The audio
ON
Using the Flex 5000 EN
VOLUME
+ or –.
LED lights up
Flex 5000 | 15