Using The Charging Reminder Function - Sennheiser Flex 5000 Manual

Flex_5000_570735_0117_PRT.book Seite 13 Montag, 10. Oktober 2016 3:58 15

Using the charging reminder function

When the receiver is switched off
and the transmitter automatically
switches off (standby mode), the
Battery LED will flash back and forth for 10 minutes to
remind you to charge the receiver.
Charge the receiver by placing it into the transmitter's
charging compartment (see page 11).
The LED stops flashing and the charging process starts.
You can also switch off the charging reminder function
(see page 28).
Putting the Flex 5000 into operation EN
Flex 5000 | 13