Using The Rs 2000; Switching The Wireless Headphone System On - Sennheiser RS 2000 Instruction Manual

Using the RS 2000

Switching the wireless headphone system on

WARNING
Vol +
Danger of hearing damage due to high volumes!
This stethoset receiver allows you to set higher volumes than con-
ventional devices. Constant high-volume use can cause hearing
Vol -
damage.
1
VOLUME
2
Before putting the stethoset receiver on, set the volume on the
receiver to a low level.
Do not expose yourself to high volume levels for extended peri-
ods of time.
Switch your audio source on.
If the transmitter is connected to the headphone socket (see
page 11) of your TV/audio source, adjust the volume of the
headphone socket on your TV/audio source to at least a medium
level.
Take the stethoset receiver out of the transmitter's charging
compartment and pull the ear bows apart so that you can put the
receiver on.
The stethoset receiver automatically switches on when you pull
the ear bows apart. The
transmitter automatically switches on and the
tus LED lights up green. The audio transmission starts.
1 2
ON
Receiver status LED lights up green. The
ON
Using the RS 2000
Transmitter sta-
RS 2000 | 15