Sennheiser Flex 5000 Manual page 8

Flex_5000_570735_0117_PRT.book Seite 8 Montag, 10. Oktober 2016 3:58 15
EN Putting the Flex 5000 into operation
Connect the optical digital cable to the pink
In digital audio input of the transmitter and to the optical
output of your audio source.
Connection possibility B: 3.5 mm jack socket (analog)
Connect the stereo audio cable to the blue
3.5 mm In audio input (3.5 mm jack socket) of the trans-
mitter and to the 3.5 mm headphone socket of your audio
source.
Adjust the volume of the headphone socket on your TV/
audio source to at least a medium level.
This improves the quality of wireless audio transmis-
sion. For detailed information, please refer to the
instruction manual of your TV/audio source.
If the headphones socket on your audio source is a 6.3 mm/
¼" jack socket, you require an adapter (3.5 mm jack plug to
6.3 mm/¼" jack plug, optional accessory) for the supplied 3.5
mm stereo audio cable.
8 | Flex 5000
Digital Optical
OPTICAL OUT
Analog
PHONES
TV VOLUME
B