Using The Flex 5000; Connecting Headphones Or An Induction Loop To The Receiver - Sennheiser Flex 5000 Manual

Flex_5000_570735_0117_PRT.book Seite 14 Montag, 10. Oktober 2016 3:58 15
EN Using the Flex 5000

Using the Flex 5000

Connecting headphones or an induction loop to
the receiver
You can connect any headphones or induction loop for hear-
ing aids with a 3.5 mm jack plug to the RR Flex receiver.
Connecting headphones
We recommend using closed headphones or earphones/ear
canal phones to avoid echoes from e.g. the TV loudspeaker.
Connect the 3.5 mm jack plug of the headphones (e.g.
MX 475, supplied) to the jack socket of the receiver.
Connecting an induction loop for hearing aids
You can only use an induction loop if your hearing aid sup-
ports an induction coil (T-coil).
Connect the 3.5 mm jack plug of the induction loop (e.g.
Sennheiser EZT 3012, optional accessory) to the jack
socket of the receiver.
Set your hearing aid to position "T".
If your hearing aid has no position "T" or if you want to
use another connection possibility for your hearing aid
or cochlea implant, please contact your hearing aid
acoustician.
14 | Flex 5000
*
*
* optional accessory