Connecting The Transmitter To The Mains - Sennheiser Flex 5000 Manual

Flex_5000_570735_0117_PRT.book Seite 10 Montag, 10. Oktober 2016 3:58 15
EN Putting the Flex 5000 into operation
Connection possibility D: SCART socket (analog)
Plug the SCART adapter* onto the stereo audio
cable.
Connect the stereo audio cable to the blue 3.5 mm jack
socket of the transmitter.
Connect the SCART connector to the SCART socket (mostly
labeled or

Connecting the transmitter to the mains

1 Connect the connector of the power supply unit to the
yellow socket of the transmitter.
2 Select a suitable country adapter and slide it onto the
power supply unit until it clicks audibly into place.
3 Plug the power supply unit into the wall socket.
All LEDs on the transmitter light up for 5 seconds. The
transmitter is in standby mode.
EU
UK
US
AU
10 | Flex 5000
) of your audio source.
1
1A
1A
2
D
*
* optional accessory
3