Assembly Of Rear Brakes - Toyota HILUX 1993 Repair Manual

BRAKE SYSTEM – Rear Brake – 4WD

ASSEMBLY OF REAR BRAKES

(See page BR–55)
HINT: Assemble the parts in the correct direction as
shown.
1. ASSEMBLE AND INSTALL PARKING BRAKE BELL-
CRANK
(a) Apply high temperature grease to the rotating parts
of the bellcrank.
(b) Apply lithium soap base glycol grease to the bell–
crank boot and insert it to the parking brake bell–
crank.
(c) Install the parking brake bellcrank to the bellcrank
bracket.
(d) Install the pin with a new C–washer.
(e) Install the bellcrank boot to the parking brake bell–
crank bracket.
(f) Install the parking brake bellcrank and dust cover on
the backing plate.
Torque: 13 N–m (130 kgf–cm, 9 ft–lbf)
BR–59