Toyota HILUX 1993 Repair Manual page 778

TRANSFER – Component Parts (Rear Output Shaft Assembly)
3.–2 (w/o A.D.D.)
REMOVE REAR BEARING, SPACER AND DRIVE
SPROCKET WITH FRONT DRIVE HUB SLEEVE
ASSEMBLY
(a) Using SST and a press, remove the bearing.
SST 09950–00020
(b) Remove the spacer and ball.
(c) Remove the drive sprocket with front drive hub and
hub sleeve.
(d) Remove the needle roller bearing.
4. (w/ A.D.D.)
REMOVE SHIFTING KEYS AND KEY SPRINGS FROM
FRONT DRIVE HUB ASSEMBLY
Using screwdriver, remove the two shifting key springs
and three shifting keys.
TF–51