AC–20
AIR CONDITIONING SYSTEM
(d) Remove the shims from the pressure
2. REMOVE ROTOR
(a) Using SST, remove the snap ring.
(b) Using a plastic hammer, tap the rotor off the
NOTICE: Be careful not to damage the pulley when
tapping on the rotor.
3. REMOVE STATOR
(a) Disconnect the stator lead wire from the compres–
(b) Using SST, remove the snap ring.
–
Compressor
plate.
SST 07114–84020
shaft.
sor housing.
SST 07114–84020