Installation Of Master Cylinder (Brake) - Toyota HILUX 1993 Repair Manual

BRAKE SYSTEM – Master Cylinder
INSTALLATION OF MASTER CYLINDER
(See page BR–10)
1. ADJUST LENGTH OF BRAKE BOOSTER PUSH ROD
BEFORE INSTALLING MASTER CYLINDER
(See page BR–17)
2. INSTALL MASTER CYLINDER
Install the master cylinder and gasket on the brake
booster with four nuts.
Torque: 13 N–m (130 kgf–cm, 9 ft–Ibf)
3. CONNECT TWO BRAKE TUBES
Using SST, connect the brake tubes to the master cylin–
der. Torque the union nuts.
SST 09751–36011
Torque: 15 N–m (155 kgf–cm, 11 ft–Ibf)
4. CONNECT LEVEL WARNING SWITCH CONNECTOR
5. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND
BLEED BRAKE SYSTEM
(See page BR–8)
6. CHECK FOR FLUID LEAKAGE
7. CHECK AND ADJUST BRAKE PEDAL
(See page BR–6)
BR–15