Toyota HILUX 1993 Repair Manual page 890

Table of Contents

Advertisement

SUSPENSION AND AXLE
3. ADJUST RING GEAR BACKLASH
(a) Install only the plate washer on the ring gear back
side.
HINT: Insure that the ring gear has backlash.
(b) Snug down the washer and bearing by tapping on
the ring gear with a plastic–faced hammer.
(c) Hold the side bearing boss on the teeth surface of
the ring gear and measure the backlash.
Backlash (reference): 0.13 mm (0.0051 in.)
(d) Select a ring gear back plate washer, using the
backlash as reference. (See page SA–77)
(e) Select a ring gear teeth side washer with a thickness
which eliminates any clearance between the outer
race and case.
Front Differential (Disassembly and Assembly of
Differential
w/o A D D )
SA–75

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents