Set Search Key
search range. The search keys are number keys 1, 2, and 3. This allows you to
start a Custom, Tone-Out, or Close Call Search without having to go into the
menus.
Search Key 1-3 Select for each Search Key.
Custom Search 1-10, Tone-Out, or Close Call.
Search with Scan
See also Select Lists to Monitor and Edit Custom Search.
Set System Avoid
Temporary Avoid, Stop Avoiding, or Avoid.
Quick Search
Allows you to enter a frequency and start searching.
Quick Search will search all the way up to 1300 MHz or all the way down to 25
MHz then start over.
Press Channel to hold on any channel or frequency. Enter the new frequency
you wish to start at then press Channel to set the new starting frequency. Press
Channel again to release hold mode and start searching.
Search Options
The scanner has three search keys that you can assign to a
This enables Custom Searches in Scan Mode.
Searching
77