Avoiding Channels, Departments, and Systems.
Temporary Avoid cancels when you cycle power. See also Reviewing Avoids.
Channel Avoid - Press Avoid once to Temporary Avoid.
Press quickly to toggle Permanent Avoid and Stop Avoiding when the
channel is in the display or in Channel Hold mode.
Department Avoid - Press Dept then Avoid once to Temporary Avoid.
Press Avoid quickly to toggle Permanent Avoid and Stop Avoiding.
Site Avoid –
System Avoid - Press System then Avoid once to Temporary Avoid.
Press Avoid quickly to toggle Permanent Avoid and Stop Avoiding.
Attenuation
Channel Attenuation - Press Channel to hold on the channel and press Func
then 4(
) to toggle attenuation.
ATT
Site Attenuation
Global Attenuation - Press Channel to hold on any channel then press and
hold Func then 4(
Modulation
Conventional Channel Modulation - Press Channel to hold on the channel.
Press Func then Channel(
Press Channel to release hold mode.
Site Modulation - Press Func then Dept to hold on a Site.
Press Channel to hold on any channel.
Press Func then Channel(
Press Channel to release hold mode.
Press Func then Dept to release Site hold mode.
Intermediate Frequency Exchange
channel. Press Func then 7(
Repeater Frequency Conventional Channel
on the channel. Press Func then press and hold 8(
Channel Volume Offset
Press Func then press 0(
Scanning
-
) to toggle global attenuation.
ATT
) to toggle modulation.
MOD
) to toggle modulation.
MOD
) to toggle on or off.
IFX
- Press Channel to hold on the channel.
) to toggle.
LVL
- Press Channel to hold on the
- Press Channel to hold
).
REV
65