Channel Options - Uniden BCD436HP User Manual

Note: Not all options will appear for all channels.
Edit Name
Edit Frequency or TGID
Set Audio Type
Set Number Tag
Set Modulation
Edit Name
See Data Naming.
Edit Frequency or TGID
Enter the frequency or ID and press E/yes to save.
To enter a Conventional Frequency, enter the Frequency and press E/yes.
To enter a Motorola Type II ID, enter the ID and press E/yes.
To enter a Motorola Type I ID, enter the Fleet Number, press .no twice for a
hyphen, then enter the Subfleet and press E/yes.
Formats: FFF-SS, F-, FFF-, NNNN-N, NNNN-, NNN-N, NNNNN, iNNNNN.
To enter an EDACS ID in AFS format, enter the Agency Number, press .no
twice for a hyphen, then the Fleet and Subfleet and press E/yes.
Formats: AA-FFS, AA-, AA -FF-, iNNNNN.
To enter an EDACS ID in Decimal format, enter the ID and press E/yes.
To enter a LTR ID, enter the Area Code (0 or 1) and press .no twice, then
enter the Home Repeater Number (01-20) and press .no once, then the
User ID (1-254) and press E/yes.
Formats: AA-HH-UUU, A-HH-.
To enter an I-Call ID, press .no once then enter the ID and press E/yes.
To enter a Wildcard I-Call ID, press .no once then enter 0 and press E/yes.
To enter Hexadecimal IDs, see Data Naming.
To enter a Unit ID, see Edit Unit IDs.
Notes: If the channel is already stored in the group TGID or Frequency Exists
Accept? (Y/N) appears. Press .no to return. You can also Avoid wildcard IDs.

Channel Options

Set Attenuator
Select Service Type
Set Delay Time
Set Priority
Set Alert
Set Avoid
Volume Offset
Delete Channel
New Channel
55