Search/Close Call Options; Frequency Avoids; Broadcast Screen; Repeater Find - Uniden BCD436HP User Manual

Hide thumbs Also See for BCD436HP:
Table of Contents

Advertisement

These are the settings you should look at before you perform a Quick Search, or
Close Call Search.
Press Menu. Scroll to Srch/CloCall Opt and press E/yes.
Scroll to the options below and press E/yes.
Freq Avoids

Broadcast Screen

Repeater Find

Freq Avoids
all Frequencies for Searching and Close Call search.
Temporary Avoids appear reversed in the display-
Stop All Avoiding See also Search Avoids.
At Confirm Delete? Press E/yes or .no.
Rvw Search Avoid
Scroll to Frequency and press E/yes to Stop Avoiding.
Broadcast Screen
broadcasts, paging systems, and other annoyance radio sources during Custom
Search, Quick Search, or Close Call Search. The default setting is Pager On.
Set All Band On/Off Turns Broadcast Screen On or Off for All Bands.
Set Each Band
Scroll to each Band and press E/yes to enable or disable.
Program Band
Band 1-10 Select for each Close Call Band.
Set Lower/Upper Limit
0-1000 MHz
Press Menu to return and repeat for each band as needed.
Repeater Find
frequency when it detects a transmission on a repeater input frequency, in Search
and Close Call modes. Turning this feature on can let you hear both sides of the
conversation on the output frequency. The default setting is Off.
On or Off
74

Search/Close Call Options

Set Delay Time
Set Attenuator
Set Audio AGC
This allows you to review Avoided Frequencies or Stop Avoiding
Automatically ignores transmissions that are on common
Sets whether the scanner tries to tune to a repeater output
P25 Waiting Time
P25 Threshold Mode
P25 Threshold Level
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bcd535hp

Table of Contents