Fire Tone-Out; Tone-Out Setup - Uniden BCD436HP User Manual

Hide thumbs Also See for BCD436HP:
Table of Contents

Advertisement

Fire-Tone-Out will monitor up to 32 different channels for paging tones (two-tone
sequential, single tone, and group tone).
Tone-Out Standby Mode is used if you know and use programmed tones.
Tone-Out Search Mode is used if you don't know the tones.
All tone-outs (channels) that have the same frequency (and modulation and
attenuation) as the one you select will also (and only) be monitored so you can
monitor up to 32 tone-out channels for one frequency.
In this case, the scanner displays each tone-out channel for two seconds. It does
not scan them; tone-out monitors the frequency for all tone-out channels with the
same frequency.
Regardless of the current display, the scanner will alert on any received tone out
that matches a stored setting (channel) for the frequency.
Press Menu. Scroll to Tone-Out for... and press E/yes.
Scroll to Tone-Out Setup and press E/yes.
Scroll to Tone-Out (0-31) and press E/yes.
Edit Name
Set Frequency
Set Tone
Edit Name
See Data Naming.
Set Frequency
Edit Frequency Enter the frequency and press E/Yes.
Set Modulation
Auto, NFM, FM
Set Attenuator
On or Off

Fire Tone-Out

Tone-Out Setup

Set Delay Time
Set Alert
Set Audio AGC
87

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bcd535hp

Table of Contents