Table of Contents
Advertisement
Scanning
With previous scanners, you selected banks to scan that had channels stored in
them. With this scanner, you select Favorites List Quick Keys to scan that have
Systems assigned to them. So, now you turn Favorites Lists Quick Keys on and
off and System Quick Keys on and off (within each Favorites List). See also
Understanding Quick Keys.
First, all (Unavoided) Favorites Lists belonging to Quick Key 1 are scanned. Then
Favorites Lists that belong to Quick Key 2,...,9,0,11,...19,10,21,... ...
80,91...,99,90 are scanned in order. Favorites Lists with the same quick key are
scanned in order of creation. Favorites Lists with no quick key are scanned last
and in order of creation (including created Quick Save Favorites Lists).
Systems within the Favorites Lists are scanned with the same rules. Conventional
channels within the Departments are scanned in order of creation. IDs are not
really scanned. The scanner checks for any activity in the trunking system and if
any ID becomes active, the scanner will display it in ID Search mode. In ID Scan
mode, the scanner will only display IDs programmed in to Departments.
Then, any (Unavoided/enabled) custom searches from 1 to 10 in turn.
Then, the scanner scans the Close Call 'Hits with Scan' system. This is a system
that automatically stores the frequencies found by Close Call. If the 'Hits with
Scan' system has no frequencies, the scanner does not scan the system.
The scanner scans a system for the duration you set using the System Hold Time
option. For trunked systems, the scanner moves to the next system after the hold
time expires, the current transmission ends, and the channel delay expires.
Conventional systems operate similarly, but all (Unavoided) channels are
scanned at least one time regardless of the hold time setting.
To Scan Channels:
1. You must enable at least one Favorites List or the Full Database in Select Lists
to Monitor.
2. Favorites Lists or Systems must be enabled with quick keys if one is assigned.
3. Systems, Departments, or Channels must not be Avoided.
4. Service Types for the channels must be set to On.
Any Favorites List not assigned to a quick key, not Avoided, and set to On in
Select Lists to Monitor will be scanned.
Any System (or Quick Save System) not assigned to a quick key and not
Avoided, will be scanned.
61
Advertisement
Table of Contents
